Direct Drive Model

Direct Drive Model

MODELS	VHM DD-70	VHM DD100	VHM DD200	VHM DD-400	VHM DD600	VHM DD800	VHM DD-1000	VHM DD-2000	VHM DD3000	VHM DD-4000	VHM DD-5000
Screw Diameter mm	35	38	45	52	57	60	65	75	90	105	120
Shot weight G.P Polystrains GMS	75	110	215	425	625	830	1075	2100	3150	4215	5250
Injection Stroke- Suck Back mm	105 +20	140+20	175+20	230+20	280+20	330+20	370+20	410+20	510+20	610+20	650+20
Plasticizing Capacity Kg/Hr	17	30	35	45	60	75	90	120	140	160	180
Injection Pressure Kg/Cm2	2110	2050	2000	1900	1900	1800	1740	1700	1600	1500	1350
Screw LD Ratio Ratio	18	18	18	18	18	20	20	20	20	20	20
Screw Revolution RPM	0-250	0-250	0-225	0-220	0-210	0-200	0-200	0-195	0-190	0-180	0-170
Clamping Force Tons	50	80	120	165	210	280	315	380	450	650	750
Clamping Stroke Inch	9	14	16	18	20	24	26	30	35	40	45
Mm. Max Mould Th. Range Inch	5X10	6X14	8X15	8X16	9X18	10X20	12X22	14X24	14X30	16X35	20X40
Tie Bar Diameter Inch	2.5	3	3	3.5	4	5	5.25	5.5	6	7.5	8
Platen Dimension Inch	17X21	20X24.5	22X26.5	24X30	28X33	34X38	37X40	40X44	43X54	50X60	55X75
Dist Between Tie Bar HXW Inch	10X13.5	12X16	14X18	14.5X20.5	17.5X22.5	21X25	23X26	25X29	28X37	30X40	33X53
Hydraulic Pump Motor HP	5	10	20	25	25	30	40	40	50	60	50+30
Screw Motor HYD.	HYD	HYD	HYD	HYD	HYD	HYD	HYD	HYD	HYD	HYD	HYD
Heating Capacity HP	3.5	6.5	8.5	9.75	11	14	16	18.5	22	25	30
Total Load HP/KW	8.5 /6	16.5 /13	28.5/22.5	34.75/27.5	36/28.5	44/34.5	56/44	58.5/46	72/56.5	85/66	110/86
Oil Reservoir Capacity LTR.	200	400	500	600	700	1000	1000	1200	1400	1800	2200
Approx. Floor LXWXH FT.	12.5X3.5X6	15X6X6	17X6X7	19X6X8.5	20X6X8	22X7.5X8	22X7.5X8	25X8X8	28X8X8	35X10X9	40X12X10
Approx. Weight KGS	2500	4200	6000	7000	8000	11500	15000	19000	23000	27000	35000

Standard Features

• Compact Power Panel
• Shot Counter
• Time Control for Recycle
• Digital Display Time Pyrometer
• Larger Between Tiebar Distance & Platen Area
• Larger Maximum Mould Thickness
• High Efficiency Heat Exchanger
• Hard Chrome Plated Tie Bars
• Centralized Lubrication System
• Screw Suck Back System
• Direct Hydraulic Screw Drive
• Mechanical Ejector
  

Optional Features

• Core Pulling Attachment
• Hydraulic Door Safety
• Motorized Auto Mould Height Attachment
• Hopper Dryer
• PLC Microprocessor Control & Proportion Electro-Hydraulic Controls
• Hydraulic Ejector
• Accumalater System for fast Injection